Explosion-proof design
Version that allows to use the equipment in hazardous areas
Serves for air compression, uses screw oil-filled or oil-free compressor
Serves as a kind of "buffer" of compressed air to equalize the pressure at the inlet to the compressor adsorption columns
Serves to equalize pressure surges and partial accumulation
Serves to remove moisture from compressed air to the dew point of +40 °F
To remove micro-particles of oil, dust and other contaminants from compressed air
Serves for separation of prepared compressed air into its main components - nitrogen and oxygen
Explosion-proof design
Version that allows to use the equipment in hazardous areas
Booster compressor
Serves to raise the pressure of the production gas
Filling station
Equipment complex allowing to fill standard cylinders with compressed gas at a pressure of up to 5000 psig
Aftertreatment system
Enables production oxygen or higher nitrogen concentrations
Size, LxWxH, mm: 40"x40"x61"
Weight, kg: 700
Capacity, SCFH
Air required, SCFM
200
7,4
180
7,1
130
6,7
110
6,6
85
6,4
50
5,5
Size, LxWxH, mm: 40"x40"x72"
Weight, kg: 850
Capacity, SCFH
Air required, SCFM
340
11,1
300
10,6
220
10,2
200
9,5
150
9,1
80
8,1
Size, LxWxH, mm: 40"x40"x72"
Weight, kg: 1050
Capacity, SCFH
Air required, SCFM
640
21,5
560
21,2
420
18,4
360
18,0
280
15,9
150
14,0
Size, LxWxH, mm: 43"x32"x68"
Weight, kg: 900
Capacity, SCFH
Air required, SCFM
930
40
740
36
550
33
500
30
350
30
300
26
Size, LxWxH, mm: 47"x32"x76"
Weight, kg: 1500
Capacity, SCFH
Air required, SCFM
1500
64
1100
59
850
51
820
55
550
49
370
42
Size, LxWxH, mm: 51"x34"x77"
Weight, kg: 1900
Capacity, SCFH
Air required, SCFM
1800
81
1490
74
1100
71
1000
67
745
64
480
58
Size, LxWxH, mm: 59"x35"x75"
Weight, kg: 2000
Capacity, SCFH
Air required, SCFM
2200
106
1800
102
1300
93
1100
90
900
86
550
79
Size, LxWxH, mm: 67"x38"x85"
Weight, kg: 2800
Capacity, SCFH
Air required, SCFM
3700
145
2950
133
1850
114
1650
113
1450
106
900
100
Size, LxWxH, mm: 69"x42"x91"
Weight, kg: 3100
Capacity, SCFH
Air required, SCFM
4450
187
3700
175
2200
153
2050
150
1850
150
1100
134
Size, LxWxH, mm: 71"x51"x98"
Weight, kg: 3800
Capacity, SCFH
Air required, SCFM
5600
245
4700
230
3400
205
2800
190
2000
170
1000
140
Size, LxWxH, mm: 78"x43"x101"
Weight, kg: 4400
Capacity, SCFH
Air required, SCFM
7450
260
5600
255
4450
240
3700
230
3000
220
1850
200
Size, LxWxH, mm: 78"x45"x92"
Weight, kg: 4900
Capacity, SCFH
Air required, SCFM
9300
320
7000
280
5600
265
4650
260
3700
240
2200
225
Size, LxWxH, mm: 83"x59"x98
Weight, kg: 5500
Capacity, SCFH
Air required, SCFM
10000
435
8500
410
6000
365
5000
340
3600
300
1850
250
1. Choose the right nitrogen concentration
Improperly chosen concentrations can be a factor in significantly increasing the price several times over. A 0.05% difference in concentration can double the cost of a system.
2. Calculate the capacity of the station
Considering all the parameters of the consumers, calculate the total amount of nitrogen consumed. Pay attention to the units of measurement, the flow should be given to normal conditions, ft³/h at 15 psig and 68℉.
3. Take into account the operating conditions
All station parameters are given under standard operating conditions of 68℉, higher temperatures above 95℉ have a negative effect on the performance of the station.
4. Choose a compressor with a 10% margin
Many factors must be taken into account for the correct operation of the system: the nature of consumption, the number of peak loads, additional losses of compressed air, the volume of air receivers and much more.
We do not share your personal information with third parties. By clicking the button, you give consent to the processing of personal information.
All generator models can be mounted on a single frame for quick installation in any heated room. In this case, the equipment is in full technical readiness for start-up.
We produce oxygen and pure nitrogen generators in containerized versions, based on 20 or 40-foot shipping containers, in any climatic design - both for tropical climates and for the far north.
Any generators can be mounted in a special container with autonomous power supply systems (diesel or gas generator) and installed on a chassis for any vehicle or trailer.
Supplied equipment:
PSA Nitrogen system GB-1500
Concentration: 97%
Capacity: 55000 SCFH
Supplied equipment:
Nitrogen station
Concentration: 99.9995%
Capacity: 13420 SCFH
Supplied equipment:
Nitrogen generator GN-120
Concentration: 99.995%
Capacity: 1715 SCFH
Supplied equipment:
Nitrogen generator GN-20
Concentration: 99.99%
Capacity: 380 SCFH
Supplied equipment:
Oxygen Generator GO-5
Concentration: 95%
Capacity: 145 SCFH
Supplied equipment:
Nitrogen generator GN-15
Concentration: 99.95%
Capacity: 385 SCFH
Supplied equipment:
Nitrogen generator GN-23
Concentration: 99.99%
Capacity: 700 SCFH
Supplied equipment:
Nitrogen generator GN-15
Concentration: 99,5%
Capacity: 590 SCFH
Supplied equipment:
Nitrogen generator GN-8
Concentration: 99.9%
Capacity: 230 SCFH
Supplied equipment:
Nitrogen generator GN-9
Concentration: 99%
Capacity: 300 SCFH
Supplied equipment:
Oxygen Generator GO-15
Concentration: 93 +/- 2%
Capacity: 560 SCFH
Supplied equipment:
Oxygen station GO-30
Concentration: 93%
Capacity: 1200 SCFH
Supplied equipment:
Nitrogen station GN-33
Concentration: 99,5%
Capacity: 1230 SCFH
Our manager will contact you within 15 minutes to clarify the details
Thank you for your request!